Machine in operation
Video demonstration. (Set the Video URL in your product data.)
Specifications
Reference specification table. Final configuration may vary with options and scope.
| Parameter | Value |
| Machine model |
LU-VTDP40 |
| Power supply |
220V-50HZ/110V-60HZ |
| The whole machine power |
1500W |
| Max flow rate |
40L/min |
| Material of pump |
Diaphragm Pump |
| Filling accuracy |
≤100ml deviation≤±1ml |
| Filling speed |
30-45bottles/min(depending on bottles and filling liquid) |
| Packing weight |
About 150kg |
| Packing size |
About192011101800mm |
| Size of air compressor connector |
OD8mm |
CAD / dimensions
CAD/dimensions are provided in a pop‑out viewer.
Site requirements
- Power: 220V-50HZ/110V-60HZ
- Air pressure: OD8mm
- Footprint / size: About192011101800mm
For the most accurate proposal, include: product viscosity/foaming, container size, closure type, and required units per hour.
Quick answers
Key answers buyers and engineers often need before shortlisting this machine.
What is 4 Heads Flow Diaphragm Pump Liquid Filling Machine used for?
The LU-VTDP40 liquid filling machine is equipped with a high-performance diaphragm pump and supports automatic operation. With a maximum flow rate of 40L/min and four independently controlled filling nozzles, it can fill 30–45 bottles per minute, making it ideal for thicker liquids such as gel, hand sanitizer, shampoo, and laundry detergent
What output can 4 Heads Flow Diaphragm Pump Liquid Filling Machine achieve?
This page lists output at 30-45bottles/min(depending on bottles and filling liquid). Actual throughput depends on the product, pack format, changeover requirements and the overall line setup.
What utilities or site requirements should I plan for?
Voltage: 220V-50HZ/110V-60HZ; Power: 1500W; Air pressure: OD8mm; Footprint / size: About192011101800mm
Can Lancing UK help match this machine to my product and container?
Yes. Lancing UK can review your product, container or pack style, target output and site constraints to confirm whether this machine is the right fit before supply.
Talk to a specialist
We’ll confirm suitability, options, integration, and realistic throughput for your product.
Project planning notes
This machine is normally shortlisted around product behaviour, dose accuracy, fill speed and how the pack will be presented to the next stage of the line. A stronger shortlist usually considers the filler in the context of the container, the closure and the output target rather than as a standalone spec sheet.
- Confirm how the product behaves during filling, cut-off and changeover.
- Check whether the container presentation into the filler is stable enough for the required output.
- Plan how filling performance will affect the capping, sealing or labelling stage that follows.
Budget, timing and quote planning
Useful commercial checks before you shortlist or request a final quotation.
Shortlisting 4 heads flow diaphragm pump liquid filling machine is usually about more than the base machine price. Buyers normally need to confirm product behaviour, fill volume, dosing method and changeover requirements, then check how that scope fits the wider line, labour model and growth plan.
This page currently highlights throughput as 30-45bottles/min(depending on bottles and filling liquid) and utilities as 220V-50HZ/110V-60HZ. If your real pack, product or site conditions differ, the final budget and lead time can change, so it helps to validate those assumptions early.
- Confirm the exact product and pack format the quote is based on.
- Check output assumptions, changeover expectations and operator involvement.
- List any utilities, footprint, guarding or line-interface constraints on site.
- Confirm whether FAT, delivery, commissioning, training or spares support are included.
Enquire about this machine
Send a message and we’ll respond with configuration options, pricing guidance and lead times.